are you afraid of your motorcycle being stolen?
we have a free solution on that
scroll down!
tracklock is an app that turns your old cell phone into a
remote controlled alarm with GPS
and not only that!
it will react to any shocks you set!
Highly optimized app!
Even an old smartphone batttery shall last for a very long time on a single charge!
It’s simple, cheap and fast!
how does it work?
put your old cell phone with an tracklock alarm app in your motorcycle…
and then?
activate the alarm app via the tracklock control app installed on your current mobile phone!
you can also set the sensitivity through the tracklock control app, so the alarm can detect theft, towing, or even a gentle impact or foreign touch on your motorcycle.
setting the sensitivity is up to you!
watch the video below!
take your daily-used smartphone and install the tracklock Control app
frequently asked questions
„and what about the battery? do I need to charge my phone too often?“
„the app is highly optimalized. our tests say that a 6-year-old smartphone with a 3500 mAh battery will last more than 36 hours when the Alarm app is fully operated!
mobile phone with 5000 mAh battery lasts up to 100 hours!
an ordinary old smartphone only needs to be charged once every 3 to 5 days.
if you go to work and use the alarm only approx. 10 hours a day, the alarm may last up to 10 days on a single charge“
create your account using your e-mail
no passwords needed! everything is operated on a fully secured passwordless basis. you only authenticate with your own e-mail
then take your old smartphone and install the tracklock Alarm app
„how does the Alarm app communicate with the Control app?“
„thanks for asking! they communicate via mobile internet data network such as edge, LTE, 3G, 4G or 5G.
this is the most reliable way of communication. other networks, such as low frequency network etc. doesn’t work properly… therefore our app works on mobile internet network. you can be almost 100% sure, that the connection between Control app in your daily used mobile is still in touch with the Alarm app placed in your vehicle!“
„sounds great! and what about the data consumption? doesn’t it consume too much data?“
„that’s a good question! thanks again!
the app is so highly optimized, it consumes only few kB of data. you may not be afraid about the bills for mobile internet!
now pair the Alarm app with the Controll app
you may pair as many devices as you want!
now you can control the alarm remotely by using the black Control app
set the alarm sensitivity or frequency of GPS polling or battery polling. you can even set the frequency of double-checking the alarm online status. this may prevent you from sophostic theft with using the network disractor!
now you’re ready to go!
just lock the Alarm app remotely by using the Controll app
alarm shall notify you, anytime it indicates shocks
you may set „sending the GPS location with any alarm notification“. but you may also use the „refresh“ button to watch for the current GPS location any time you want!
go on!
your vehicle is waiting