• We are pleased to present Czech language support!
• Information about collected points is extended to include GDOP, NTRIP mountpoint info, and the number of satellites for each constellation.
• The inverse tool now visualizes enclosed area.
• Various fixes and improvements.
• We updated the Collector tool with the “Precision limit” setting! Now you have more control over the quality of the data you collect. This new feature is available in both Free and Survey plans.
• We are introducing the Inverse and Traverse functionality! Now, you can use the Inverse tool to view information about the selected points (area, slope distance, 2D distance, etc.). The Traverse tool lets you calculate a new point based on an existing point and the distance, azimuth, and elevation difference you enter.
• We are introducing the Stakeout report feature. Now you can save points directly from stakeout mode and export the coordinate deltas as a CSV report.
• Various fixes and improvements.
• We are introducing the Stakeout report feature. Now you can save points directly from stakeout mode and export the coordinate deltas as a CSV report.
• Various fixes and improvements.
• The Line Info screen now provides more information about each segment of a line.
• Various fixes and improvements.
• The stakeout tool now displays the azimuth value. The azimuth value is a measure of the direction from a rover to a target in point stakeout, and to an intersection point in “To line” mode.
• You can now select and view point and line information directly from the collect and stakeout modes.
• Various fixes and improvements.
• The stakeout tool now displays the azimuth value. The azimuth value is a measure of the direction from a rover to a target in point stakeout, and to an intersection point in “To line” mode.
• You can now select and view point and line information directly from the collect and stakeout modes.
• Various fixes and improvements.
• Added new coordinate systems for Ireland, Germany, and Hong Kong.
• Updated the geoid used for “DVR90 height” to a newer version.
• Various fixes and improvements.
• The “FIX only” option is now available for the Stakeout tool. When turned on, the setting will also show a notification in the status bar, highlighting insufficient conditions.
• We updated the Profile section of the app. You can now find the link for documentation for every Emlid receiver and software product. The offline PDF docs are also available for download at the bottom of the documentation page.
• Various fixes and improvements.
• Various fixes and improvements.
• Added a bunch of WGS84-based projections for India.
• Added a new vertical datum was introduced for high-precision measurements in Bucharest, Romania—“Bucharest-Ilfov MN75 height”.
• The UTM zones 34N and 35N of the ETRS89 datum are now available for Romania.
• The “Romania MN75 height” was renamed to “MN75 height” and updated and now it uses the latest version of the geoid: “EGG97_QGRJ_2023.tif”.
• We are pleased to introduce a major update of the Survey plan—Localization. With this new feature you can calibrate your work site to fit existing control points for better precision.
• Various fixes and improvements.
• Various fixes and improvements.
• We added new “ETRS89” to “MGI” transformation that uses the updated 2021 version of the “AT_GIS_GRID” grid. “ILUM2 height” for Israel was also added.
• Various fixes and improvements.
• You can now search the lists of projects and NTRIP profiles.
• Various fixes and improvements.
• Survey plan users can now change points' codes. That includes older data created before coding was introduced to Emlid Flow. Note that this update also fixes the ordering of objects when exporting or importing data.
• Meet the updated object list in the project view! Check out the improved search logic and redesigned display of lines' contents.
• Various fixes and improvements.
Meet Emlid Flow and new surveying features! ReachView 3 is now Emlid Flow. The new app features professional survey features. Collect and stake out points and lines, perform offset and chainage. Use our code library or upload your own to collect data faster. Use a satellite map view for more context. Start your 1-month trial in the Profile tab!
• Various fixes and improvements.
• When connected to a receiver, you can now change its Bluetooth settings and manage its paired devices.
• Various fixes and improvements.
• We added the ability to delete custom coordinate systems.
• The app now shows more verbose warning messages if there is an issue with NTRIP credentials or the selected mountpoint.
• Various fixes and improvements.
• Exported CSV files now have additional columns containing geographic coordinates of the base.
• Various fixes and improvements.
• Exported CSV files now have an additional column containing the name of the coordinate system.
• Added the new transformation from RGF93 to NTF used for all CRSs based on NTF datum. These systems now require grid downloading.
• When connected to a receiver, you can now check its Firmware version and available updates from inside the app.
• Various fixes and improvements.
• Coordinate systems without a projection are discontinued. If you want to work in degrees, you may use the new Global CS option.
• Added the datum transformation from ETRS89 to Belge 1972, used in Belgium.
• There are new vertical datums for France, Brazil, South Africa, and Belgium.
• We increased the maximum collection time to 60 minutes.
• Position accuracy is now shown at all times, not just when averaging.
• Various fixes and improvements.
• Various fixes and improvements.
• Now, devices with a Firmware version lower than 26 need to be updated to work with ReachView 3.
• Meet new base shift feature, which allows applying a real-time shift to rover and base coordinates. To do this, open the corresponding wizard from the project info bottom sheet and select measured and known points.
• You can now restore settings of your Reach from the app! To do this, select a corresponding menu item in the general settings section of your connected device.
• We present you the ability to add points to a project by manually entering coordinates! While in the project, head to the points list, where you can now find a new control to add a point.
• Various fixes and improvements.
• Various fixes and improvements.
• Now, you can restart and shut down your Reach from the app! To do this, tap on the connected device on the scanner or device settings screen and select a corresponding menu item.
• Fixed an issue that could change points’ coordinates upon import if the project uses a custom CRS with Molodensky-Badekas transformation. If you encountered such behavior, we recommend creating a new project.
• Added an ability to check base coordinates in the point info bottom sheet.
• Added new vertical datum, “Greece GREEKGEOID2010 height”, used in Greece.
• There are new horizontal CRSs for Greece: “HTRS07”, “HTRS07 / TM07”, “GGRS87”, and “GGRS87 / HEPOS”.
• Added a new “Baltic 1977 height” vertical datum for Georgia.
• Various fixes and improvements.
• Various fixes and improvements.
• Various fixes and improvements.
• Starting with Reach Firmware version 26, the app will save the highest PDOP value received during point collection. These values will be available in exported CSV files.
• Various fixes and improvements.
• Now, you can copy point coordinates and CRS info from the project’s bottom sheets with a long tap on them.
• The Swiss vertical CRS “LHN95 height” is available once again! Projects created before the system’s removal will ask you to re-download the geoid file.
• There is a new vertical datum “LN02 height” for Switzerland.
• Update metadata for a bunch of geoid files (“SRVN16 height”, “Latvia 2000 height”, “NN2000 height”, “N60 height”). Existing projects will ask you to download updated files.
• Correction output settings will now notify you if LoRa requires a higher air data rate. This feature covers the case when you enable LoRa, but the set air date rate doesn't suffice for configured RTCM3 messages. In such a case, the app will prompt you with a dialog describing the situation.
• The correction input settings screen and the status overview drawer will now show if your device is receiving corrections.
• Minor visual updates.
