Yeastar Linkus Mobile Client

Fixed the issue that Linkus would crash unexpectedly.

1. Added support for Android 13 adaptation.
2. Added support for External Chat feature, which allows you to centrally deal with customer queries (from different messaging channels, such as SMS or social media) on Linkus Mobile Client.
3. Optimized user interface to improve user experience.

Fixed the issue that failed to perform attended transfer.

Fixed the issue of call volume: The call volume was excessively low and adjusting the volume did NOT take effect.

-Added compatibility with the Boss-Secretary feature. On Call Logs, boss extensions can check the logs of calls that are automatically forwarded to the secretary extension, which are displayed as missed calls and labeled with a “Secretary” icon. 【P-Series】
Note: This feature is only available for extensions that are set as “Boss Extension” by the administrator.

1.Added compatibility with Two-factor Authentication (2FA) feature. With 2FA enabled, you need to enter your extension password and an additional authentication code when logging in to your account. 【P-Series】
2.Fixed the issue that failed to answer calls on Linkus.【All】

1.Added support for agent pause reason: Queue agents can switch status to pause with a reason by dedicated button or feature code. ——Affected PBX: P-Series PBX System
2.Fixed the issue that failed to download voicemail messages and call recordings. -- Affected PBX：P-Series Cloud Edition
3.Fixed the call issue: Failed to make outbound calls with a prefix containing “*”.
4.Improved Linkus stability: Fixed the issue that Linkus would crash unexpectedly.

Improved the Linkus stability.

1.Added support for setting Linkus as the default phone app.
To achieve this, open Settings on your phone, go to Apps→Default apps, then set Phone app to Linkus.
2.Added support for logging in to Linkus using Microsoft account or Active Directory domain account.
3.Added support for Call Flip feature.
4.Added support for Call Switch feature.
5.Fixed the issue of delayed notification for incoming calls.

Fixed the push notification issue of Linkus calls: Push notifications did not take effect when users received a new call.（All Yeastar PBXs）

1.Added compatibility with large capacity Yeastar P-Series Software Edition.【P-Series Software Edition】
2.Moved “Codec” and “ICE” to Me→Settings→Audio Options. 【All Yeastar PBXs】
3.Optimized user interface to improve user experience. 【All Yeastar PBXs】

1. Added support for Portuguese interface.【All Yeastar PBXs】
2. Fixed the issue that NFC feature was not supported under Russian interface.【P-Series PBX System】
3. Fixed the call issue: After enabling SRTP feature for an extension, the extension user failed to make calls.【P-Series PBX System】
4. Fixed the push notification issue of Linkus calls: After users dialed a feature code to switch extension presence, the users could not receive notifications on incoming calls.【P-Series PBX System】

Improved Linkus stability.

Fixed the issue that failed to make a call using IPv6.【All Yeastar PBXs】

1、Added support for resetting login password by email address.【P-Series IPPBX】
2、Added support for multiple accounts, which allow you to switch between accounts without having to log out and log back in (Path: Me>Settings>Account Management).【All Yeastar PBXs】
3、Optimized audio experience in busy tone.【All Yeastar PBXs】

Improved Linkus stability.

1. Added compatibility with Voicemail Transcription feature, which allows users to read voicemails in text format. 【P-Series IPPBX】
Note: PBX requirement:
• P-Series Appliance Edition: 37.5.0.9 or later.
• P-Series Software Edition: 83.5.0.9 or later.
2. Added Ringtone option: Users can set a specific ringtone for Linkus to distinguish Linkus calls from system calls (Path: Settings>Audio Options>Ringtone).【All Yeastar PBXs】
Note: The available ringtones are synchronized from your phone.

1. Added compatibility with Phonebooks feature, which allows users to view company contacts by phonebooks.【P-Series IPPBX】
Note:
• PBX requirement: Version 37.4.0.16 or later.
2. Added support for Interactive Connectivity Establishment (ICE) feature, which helps improve call quality. 【P-Series IPPBX】
Note:
• PBX requirement: 37.4.0.16 or later. Subscribed Enterprise Plan or Ultimate Plan.
• Linkus requirement: Logged in via Serial Number (SN) or Fully Qualified Domain Name (FQDN).

1. Added support for Chat feature.【P-Series IPPBX】
Note: PBX Server requirement: Version 37.3.0.40 or later.
2. Optimized Outbound Prefix feature: Added support for adding + as the prefix number. 【All Yeastar PBXs】
3. Optimized Dial Pad Tones setting: Added support for following system settings. 【All Yeastar PBXs】
4. Fixed the issue of Linkus calls: When a new call arrived during a call, Linkus automatically picked up the new call after the caller of previous call hung up. 【All Yeastar PBXs】

1. Added support for deleting one-touch recording files. 【S-Series IPPBX & Cloud PBX】
2. Added support for the following codecs: u-law, a-law, iLBC, G722, and G729. 【P-Series IPPBX】
3. Added compatibility with All Busy Mode for Endpoints.【P-Series IPPBX】
4. Added compatibility with group voicemail feature: You can share the workload of reading and responding to voicemail messages within your team. 【P-Series IPPBX】
5. Fixed the issue that the volume of phone receiver was too low during a call.

1. Added support for switching audio to the speaker or a bluetooth device during a call.
2. Added support for Nederlands (Dutch) interface.
3. Optimized user interface to improve user experience.
4. Fixed the display issue of time: If a phone was set to 12-hour time, the time of call logs would display incorrectly.

Added support for the following codecs: u-law, a-law, iLBC, G722, and G729. If you suffer from bad call quality, try to solve it by adjusting codec (Path: Me>Settings>Advanced>Codec).
Note:
-A codec works only when it is enabled on both Linkus and PBX server.
-PBX server must meet the following version requirements:
S-Series VoIP PBX: 30.14.0.97 or later.
K2 IPPBX: 80.14.0.97 or later.
Cloud PBX: 81.14.0.97 or later.

All Yeastar PBXs：
Fixed the issue that duplicated extension numbers caused the destination error of When Busy.

P-Series IPPBX：
1. Added support for automatically switching extension presence based on Business Hours and Holidays.
2. Added Linkus Web Client in Ring Strategy.
3. Added support for Contacts feature.

1. Optimized problem-reporting feature: When reporting a problem, users must describe the problem in detail.
Note: 10-500 characters are required.
2. Fixed the issue that bluetooth would disconnect during a call.
3. Fixed the issue of repeated calls: If you double tapped a call log, Linkus would make two calls and generate two call logs.
4. Adjusted compatible version: Android 5.0 or later.

1. Added compatibility with Yeastar P-Series PBX System.
2. Added support for using NFC to change the IP address of Yeastar P-Series PBX System.
For more information, see Change the IP Address of the PBX.
3. Added support for Slovak interface.
4. Fixed the issue of call delay and inconsistent call logs.

Improved user experience.

Improved the Linkus stability.

1. Added support for Czech interface.
2. Added support for Spanish interface.
3. Added support for multi-party calls: Users can have an ad–hoc conference call with 2 or more participants; every user can invite up to 3 participants to join the call.
4. Added support for deleting all logs.

1. Added compatibility with Dark Mode: With Dark Theme enabled on Android system, Linkus can run in dark mode.
Android 10 or later: Support Dark Mode.
Android 9 or earlier: Only few Android models support Dark Mode.
2. Added support for copying phone number on Call History Details page.
3. Added support for Hungarian interface.
4. Added support for Traditional Chinese interface.
5. Fixed the issue that the phone didn't ring when receiving an incoming call from Linkus.

Added support for Car Bluetooth switch: When enabled, if the car bluetooth is connected to Linkus, you can answer or hang up incoming calls on the car screen.
Note: Go to Me>Settings>Advanced Options>Car Bluetooth to enable this feature.

1. Added support for adjusting the volume of the audio received and transmitted (Path: Me> Settings >Audio Options >Audio Gain Control).
2. Added support for Greek interface.
3. Added support for Turkish interface.
4. Optimized user experience in Contacts and Call History.
5. Added support for compatibility with bluetooth car kits.
6. Fix the page lag issue.

Added support for Contacts feature: Contacts allows you to access contacts outside your organization, including personally managed contacts and shared company contacts.

Note: The Contacts feature requires support from server. The server version must meet the following requirements:
S-Series VoIP PBX: 30.13.0.15 or later.
Cloud PBX: 81.13.0.15 or later.
K2 IPPBX: 80.13.0.15 or later.

1. Optimized Conference.
2. Fixed the issue of pop-up notification: Incoming calls from Linkus could not pop up on Android 10.
3. Optimized Call Pickup feature: Optimized Call Pickup feature: The original caller's number will be displayed on Linkus when you pick up the call on Linkus.
4. Optimized Contacts page: If users refuse Linkus to access to phone contacts, and select Never ask again after denying permission, the pop-up window will not display any more.

1. Added pop-up window for Linkus update.
2. Added support for copying and pasting phone number onto Dialpad interface to quickly place a call.

1. Added support for French interface.
2. Added prompt: During the call, Linkus will display a prompt that indicates bad call quality when the network environment is bad.
3. Fixed the Caller ID issue: If Distinctive Caller ID settings was enabled on PBX, no caller ID would be displayed on Linkus.

1.When your mobile phone has no internet,different prompt messages are displayed according to the Linkus usage scenarios.
2.Optimized the prompt messages for call failed errors.
3.Optimized the display order of contact names: The display order of "First Name" and "Last Name" is adjusted automatically according to your mobile language setting.
4.Optimized the User Interface.

1. Fixed known issues.

1. Optimized the call experience.
2. Optimized the call logs.
3. Fixed known issues.

1. Optimized the call experience
2. Optimized the call logs
3. Fixed known issues

1. Optimized call quality.

1. Fixed the issue that Linkus could not connect to K2 IPPBX.

1. Optimized call quality.
2. Optimized Google FCM (FireBase Cloud Messaging) for Linkus.
3. Optimized Linkus UI.
4. Fixed known issues.

1. Fixed known issues.

1. Added Audio Debugging feature.
2. Added support for turning on and turning off Message sound.
3. Added support for enabling and disabling message notifications on Linkus mobile client.
4. Added support for check audio transmission status for a current call.
5. Added Terms of Service.
6. Added support for Polish UI.
7. Optimized Google FCM (FireBase Cloud Messaging) for Linkus.
8. Fixed known issues.

1. Fixed known issues.

1. Added support for forcing logout of Linkus Windows/Mac Desktop
2. Added support for displaying presence status
3. Added Chat button on the detailed Call Log page to help you quickly chat with the person
4. Added support for reporting a problem on Linkus
5. Optimized call logs.

1. Added support for Linkus Cloud Service on Yeastar S-Series VoIP PBX: The S-Series users can use Linkus Chat function and experience better Linkus services.

1. Added support for searching contacts when creating a chat group.
2. Added support for viewing the contacts' presence status.
Note: Server requirement: S-Series VoIP PBX v30.9.0.5 or later .
3. Added support for viewing images and videos in full screen.
4. Optimized voicemail push.
5. Optimized the Linkus interface.

1. Fixed the compatibility issue with 4.4 inch phones.

1. Added support for Chat feature.
2. Added support for Presence feature.
3. Improved the Linkus stability.
4. Optimized Linkus iOS Push.
5. Fixed known issues.

1. Added Privacy Policy Agreement on the Linkus client.
2. Added supported for inviting multiple members in a conference.
3. Improved the user experience.
4. Optimized audio calls through Bluetooth.
5. Fixed the issue that after you disconnected a Linkus call, there would be no sound on other applications on your
phone.

1.Added email login method.
2.Added Help documents in Linkus.
3.Improved the login security.
4.Optimized the user experience of receiving calls and ending calls.
5.Optimized call logs.
6.Optimized Debug function.
7.Fixed the recording issue on Android 4.4.

1. Fixed the issue that Linkus would log out automatically.2. Added support for displaying the name of mobile phone contact when a Linkus call comes.

1. Added support for MiPush, Huawei Push, and JPush.2. Added Background Mode setting.3. Optimized number rewriting feature: users can directly rewrite the contact’s number on Linkus, then dial the customized number.4. Fixed the Linkus dial pad issue: searching contacts by name could not work when users were trying to add a conference member.5. Fixed the Linkus dial pad issue: there was no keypad tone when dialing number during conference or making a second-dial.

Compatible with Yeastar Cloud PBX.

Fixed the issue that the call answering screen wouldn’t show when the phone was locked and slide to unlock had been enabled.